325-754-KSS1(5771)

Search results for 'benchrest'

8 Item(s)

per page

Grid  List 

Set Ascending Direction
  1. Used Anschutz 1807 w/ 2 Stocks .22lr Rifle

    Used Anschutz 1807 w/ 2 Stocks .22lr Rifle

    Regular Price: $2,350.00

    Special Price $1,995.00

    Out of stock

    Used Anschutz 1807 w/ 2 Stocks .22lr Rifle

    We have a used 1807 Anschutz(Match 54) with Side Safety and the great Anschutz 2-Stage Trigger.

    The Rifle has a Harrel Tuner, Kelbly Fiberglass Benchrest Stock, and the Factory Stock as pictured.  It has a unique Black Delrin Triggerguard.  The rifle in the Kelbly Stocks weighs 8.6lbs and should make 10.5lbs with a scope and rings very easily.

    This is a good buy for someone wanting to shoot Benchrest and Sihlouettes with the same rifle.  The 2 stocks will enable you to do that.  You can purchase the barreled action with just one stock for $1950.  You pick the stock.

    Learn More
  2. Shilen Rifle Barrels-Any Caliber

    Shilen Rifle Barrels-Any Caliber

    $140.00

    Shilen Rifle Barrels

    Allow 12 Weeks for delivery

    Please call for any questions

    The information below will help you select the best barrel twist for your specific needs, providing of course there are multiple choices. If you'll be shooting one bullet weight, choose a twist from the chart just fast enough to stabilize it. Too fast a twist simply overspins the bullet and may result in reduced accuracy. On the other hand, a twist too slow for any bullet will likely produce instability, keyholing and rotten accuracy. So if you're going to be using several bullet weights, be sure to select a twist that will stabilize the heaviest one, since lighter bullets will also be stabilized.

    By way of explanation, the numbers in the "Twist" column indicate how far the bullet must travel through the bore to make one full revolution. This is determined by the rate of rotation of the rifling. For example, a 9"-twist barrel spins the bullet one full turn when it passes 9 inches through the bore. In a 16"-twist barrel, the bullet makes one revolution in 16 inches. So at the same bullet velocity, the 9" twist is faster (spins the bullet faster) than the 16" twist. Consequently, as the chart reflects in the .224 CF section, the 9" twist is necessary for stabilizing heavier bullet weights.

    Again looking at the .224 CF section, if you're planning to shoot 55-grain bullets, the 14" twist is ideal. This twist is also the best choice for 52- and 53-grain match bullets driven at moderate velocities. But if you're also contemplating shooting a 60-grainer, go with the 12" twist, since it will stabilize all the bullets you'll be using. As you can see from the 15" and 16" twists, higher velocities also spin the bullet faster and may enable a slower-than-recommended twist to stabilize a marginally overweight bullet. However, this is tricky stuff best left to those who are highly experienced in operating at the ragged edge of stability and sanity.

    The basic principles just outlined apply to all the calibers below.
    But, if you have questions or need a recommendation, let us know.

    Caliber Twist:

    .172
    - 9" for bullets heavier than 30 gr.
    - 10" for bullets up to 30 gr.

    .204/20
    - 9" for VLD bullets
    - 10" for bullets up to 45 gr.
    - 12" for bullets up to 39 gr.

    .222 RF
    - 10" * 60 gr. bullets Ratchet rifled 4 groove
    - 14" * Twist for pistol barrels
    - 15" * Special twist for rifle barrels
    - 16" Standard twist for rifle barrels
    - 16" Ratchet rifled 4 groove
    - 17" * Special twist for rifle barrels

    .224 CF
    - 7" for bullets heavier than 70 gr.
    - 8" for bullets heavier than 70 gr.
    - 8" * Ratchet rifled 4 groove
    - 9" for bullets up to 70 gr.
    - 10" * for bullets up to 65 gr.
    - 12" for bullets up to 63 gr.
    - 14" for bullets up to 55 gr.
    - 14" * Ratchet rifled 4 groove

    6mm/.243
    - 8" Special for VLD bullets over 100 gr.
    - 8" * Ratchet rifled 4 groove
    - 10" For bullets up to 95 gr. and VLD under 100 gr.
    - 12" for bullets up to 85 gr.
    - 13" * for bullets up to 75 gr.
    - 13.5" * for bullets up to 70 gr.
    - 14" * for bullets up to 70 gr.
    - 14" * Ratchet rifled 4 groove
    - 15" * Special for bullets up to 70 gr.

    .257
    - 9" for bullets heavier than 100 gr.
    - 10" for bullets up to 100 gr.
    - 12" for bullets up to 90 gr.
    - 13" * for bullets up to 80 gr.

    6.5mm/.264
    - 8" for bullets heavier than 130 gr.
    - 8" * Ratchet rifled 4 groove
    - 9" for bullets up to 130 gr.

    .270
    - 10" for all bullets
    - 11" * for all bullets - 4 groove

    7mm/.284
    - 8" for all bullets-customer discretion 180 gr. VLD
    - 8" * Ratchet rifled 4 groove
    - 9" for bullets heavier than 140 gr.
    - 11" for bullets up to 140 gr.
    - 12" * special for high velocity

    .307
    - 13" * Special size and twist

    .308
    - 7" * for heavy VLD bullets and/or subsonic ammo.
    - 8" for bullets heavier than 220 gr.
    - 10" for bullets up to 220 gr.
    - 10" * Ratchet rifled 4 groove
    - 12" for bullets up to 170 gr.
    - 13" * Ratchet rifled 4 groove
    - 14" * for bullets up to 168gr.
    - 15" * for bullets up to 150 gr.
    - 17" * for bullets up to 125 gr.

    7.65mm/.311
    - 10" for all bullets

    8mm/.323
    - 10" for all bullets

    .338
    - 8" for all bullets
    - 9" * Ratchet rifled 4 groove
    - 10" for all bullets

    9mm/.355
    - 10" * Ratchet rifled 4 groove
    - 14" for low velocity wad cutters
    - 16" for all other bullets

    9.3mm/.365
    - 12" for all bullets

    .38/.357
    - 14" for low velocity wad cutters
    - 18" for all other bullets

    .358
    - 12" for all bullets
    - 14" for all bullets

    .375
    - 12" for all bullets

    10mm/.400
    - 16" for all bullets

    .411
    - 14" for all bullets

    .416
    - 14" for all bullets

    .44
    - 20" for all bullets
    - 16" for low velocity wad cutters

    .451
    - 16" for all bullets

    .458
    - 14" for all bullets

    * Stainless Steel only

    Contours

    What size barrel will serve you best?
    The information below will give you an idea of the size and weight of every Shilen barrel contour.
    Dimension "C" is the barrel diameter at dimension "F".
    Reminder:
    * The stamped end of the barrel is the chamber end.
    * You must cut 1" off each end of the barrel.
    * The straight shank area on our turned blanks is a non-machined surface and
    must be put between centers and trued prior to threading and chambering the barrel.
    Longer blanks are available

      Shilen Contour Dimensions (inches)  
    Contour # A B C D E F G Weight at
    G length
      1 Featherweight 1.220 .700 .550 2.5 6 20 22 2 lbs 10oz.
      2 Lightweight 1.220 .765 .575 2.5 6 24 26 3 lbs 3oz.
      3 Sporter 1.220 .815 .625 2.5 6 24 26 3 lbs 7oz.
      4 Magnum Sporter 1.220 .860 .650 3.0 6 26 28 3 lbs 14oz.
      5 Lightweight Varmint 1.220 .910 .700 3.0 6 26 28 4 lbs 8oz.
      5-1/2 Medium Weight Varmint 1.220 .960 .750 3.0 6 26 28 4 lbs 14oz.
      6 Lightweight Target [1] 1.220 -- .750 3.0 -- 26 28 6 lbs
      7 LV Light Varmint [2] 1.220 -- .840 3.0 -- 26 28 6 lbs 12oz
      7 Standard Varmint [2] 1.220 -- .890 4.0 -- 26 28 7 lbs 1oz.
      7 HV Heavy Varmint [2] 1.220 -- .940 5.0 -- 26 28 7 lbs 8oz.
      8 Heavy Bull Barrel 1.220 -- 1.000 3.0 -- 26 28 7 lbs 12oz.
      9 Rimfire Target [1] 1.125 -- .825 4.0 -- 26 28 5 lbs 12oz.
      10 Benchrest Special [3] 1.250
    thru
    1.450
    -- -- -- -- -- 30 --
      11 Straight Barrel (customer choose diameter) 1.230
    (Max)
    -- -- -- -- -- -- --
      12 Super Size [3] -add diameter to any contour +.050-+.150" +.050-+.150 +.050-+.150 same same same 30 --
      17 Remington Varmint (Sendero) 1.220 .940 .830 2.0 4.5 24 28 5 lbs
      18 Remington Standard [4] 1.220 -- .650 -- -- 25 26 2 lbs 8oz
      19 Remington Magnum [4] 1.220 -- .850 -- -- 25 26 3 lbs
      LP Light Palma 1.220 .900 .800 2.0 4.5 30 32 4.5 lbs
      MP Standard Palma 1.220 .900 .800 2.5 5 30 32 5.5 lbs
      HP Heavy Palma 1.220 .1000 .900 2.5 5 30 32 6.5 lbs
     46 Mag Supressed Our #4 contour with a swell back up to .880 from the 16.5"to 19".  19"  3lbs 3oz.

    [1] Straight taper.
    [2] Straight taper in special contour for Varmint Class of benchrest competition.
    [3] Straight cylinder, 30" long, any diameter from 1.230" to 1.450", 29" maximum finish length. This contour is only available in stainless.
    [4] Contours only available on barrels for the Rem 700 either prethreaded and chambered or installed by Shilen.

    Free Ground Shipping No Export without a License

    Learn More
  3. Weaver T-Series XR

    Weaver T-Series XR

    Starting at: $549.95

    YOUR NEW WEAVER T-SERIES XR RIFLESCOPE

    Weaver T-Series XR Scopes are a re-introduction of the legendary W.R. Weaver T-Models first produced in 1977 using the patented Micro-Trac system.  Now with refined mechanics and modern optical systems, the T-series XR Scopes have become a precise, tough shooting instrument that all Benchrest and Silhouette marksmen can rely on for consistency and repeatability.

    New T-Series XR Offers

    • Side focus on each model

    • Optional Reticle with fine-cross hair and 1/16th MOA Dot

    • New 46X with 30mm main tube and 48mm Objective

    • 1/8 Clicks as Old T-Series

    • Standard with Lens caps, sunshade, and Target Turretts

    • Limited Lifetime Warranty

    • Focus down to 50 yds. or out to infinity

    • 46X weighs 23 oz. without caps and without Sunshade

    • NO Export
    Learn More
  4. Weaver T-36 Rifle Scopes

    Weaver T-36 Rifle Scopes

    Starting at: $469.95

    Whether it's putting repeated rounds into the same hole or picking off small varmints at hundreds of yards, Weaver's T-Series fixed riflescopes give you the eighth MOA accuracy you need to be dead on, shot after shot. Each T-Series scope features the incredibly accurate Micro-Trac adjustment system that gives you more accurate, completely independent windage and elevation control. An adjustable objective provides parallax-free shooting--so no matter how off-center your eyepiece-to-eye alignment is, your point of impact won't be affected. Fully multi-coated optics increase brightness to 94% at 550mm. These superior optics punch up the contrast, eliminate glare and deliver unparalleled clarity. Every T-Series scope comes with traditional eyepiece focus, a sunshade, screw-in metal lens caps and an extra pair of oversized benchrest adjustment knobs.

    ModelExit Pupil (mm)Field of View
    ft@100 yds/ m@100m
    Eye Relief
    (in./mm)
    Length
    (in./mm)
    Click Value
    in.@100yds/ m@100m
    Adjustment Range
    in.@100yds/ m@100m
    Weight
    (oz./g)
    849976 1.67 1.57/.5 2.99/76 15.04/382 ⅛/3.6 41.89/1.16 16/454
    849970 1.1 3/1.0 3.09/78.5 15.04/382 ⅛/3.6 41.89/1.16 17/487
    849981 1.1 3/1.0 3.09/78.5 15.04/382 ⅛/3.6 41.89/1.16 17/487
    849974 1.1 3/1.0 3.09/78.5 15.04/382 ⅛/3.6 41.89/1.16 17/487
    849969 1.1 3/1.0 3.09/78.5 15.04/382 ⅛/3.6 41.89/1.16 17/487

     

    • -nch tubes
    • Fully multi-coated lenses
    • A/O adjustment for parallax-free hooting
    • Micro-trac system for precise windage and elevation control
    • 1/8 MOA ccuracy

    NO Export

    Learn More
  5. Bronze Brushes

    Pro-Shot Bronze Rifle Bore Brush

    Starting at: $2.15

    "Benchrest Quality" brush consists of a Brass Core, Bronze Bristles, Brass Coupling, Looped End, Oversized Diameter, and Caliber or MM Specific. The Ultimate BORE BRUSH that out performs and lasts longer than the competition. YOUR FIREARMS DESERVE THE BEST IN GUN CARE, invest in a Pro-Shot "Benchrest Quality" bore brush! Designed for competition shooters to withstand frequent use. Pro-Shot’s Benchrest Quality Brush has been used for many years with several world records to its credit. This bore brush is exceptional for bore cleaning with superior cleaning ability and it will not harm the bore. All Pro-Shot Benchrest Bore Cleaning Brushes have a specific size for each caliber with each brush being oversized for extended life. All brushes have #8-32 thread, except .17 & .20 Cal. which is #5-40 thread. Learn More
  6. Pappas One-Piece Rest

    Pappas One-Piece Rest

    Starting at: $650.00

    ***CUSTOM MADE***ALLOW 2 WEEKS TO SHIP*** *One Piece Rest for Rimfire Benchrest * Made of aluminum *Single Plate Rest Weighs appx. 31 lbs. *Double Plate Rest Weighs appx. 35 lbs *Windage and elevation in the rear of the rest *Butt rides on Delrin *Cradles your rifle from forend to buttstock *Simple and precise windage and elevation adjustments *Reduced friction and vibration *Interchangeable front tops (Delrin or Sandbag) *Front Adapter allows use of Fulghum Tops *33" Long, 10" Wide in front, 6" Wide in rear

    ***All Pappas products are custom made and may take up to 2 weeks to ship. *****

    Learn More
  7. Brass Jags

    Pro-Shot J22/6B Brass Jag .22/6mm

    $3.69

    This Benchrest Quality unique spear tip brass jag keeps the patch in place when cleaning. A jag draped with a patch completely covers the bore for a superior job of cleaning. For the perfect fit, use Pro-Shot 100% cotton flannel cleaning patches. All jags have #8-32 threads, except .17 Cal. and .20 Cal., which is #5-40 thread. This is for the .22/6mm jag Learn More
  8. Weaver T Series

    Weaver T-24 Blk 1/8 Dot

    $432.68

    Out of stock

    • Fully multi-coated lenses for the ultimate in light transmission and image brightness (94% at 550mm) while reducing glare • 1/8" MOA accuracy for tight groups and long range accuracy • Adjustable objective for parallax-free shooting • QuadZero™ adjustment system for a more accurate, completely independent windage and elevation control • Comes with traditional eyepiece focus, sunshade, screw-in metal lens caps and extra pair of oversized benchrest adjustment knobs Learn More

8 Item(s)

per page

Grid  List 

Set Ascending Direction