We can NOT Export items in this Category
Out of stock
PDT stands for particle dampening technology. We applied published scientific research on particle dampening technology to our new patented barrel tuner. It uses Tungsten powder to dampen the rifle.
The advantages are a wider tune window and less ammo sensitivity due to more efficient control of barrel harmonics…in a tuner design that looks great. This is the next step in the evolution of tuner design and is significantly better than tuning with solid mass alone, as is the case with most other tuner designs currently available.
PDT tuners work equally well on both centerfire and rimfire rifles, and can use your PRX length in most cases! This version clamps on like a Harrell’s and can be bored to your barrel diameter, and as mentioned, cut to your nearest PRX, if desired.
Weight is 10 oz, and tuner does not accept additional weights
*Harrell Style Muzzle Tuner *Easily clamps to muzzle of barrel *8oz. *500 individual settings *Will fit any barrel from .750" diameter to 1.016" diameter, but must be bored to fit your barrel. Tuner comes .750" from the factory. *Boring Tuner for your Barrel is $15, please indicate barrel diameter below if you desire for us to bore the tuner.
*Harrell Style Muzzle Tuner *Silver *Easily clamps to muzzle of barrel *8oz. *500 individual settings *Will fit any barrel from .750" diameter to 1.016" diameter, but must be bored to fit *Boring Tuner for your Barrel is $15, please indicate barrel diameter below if you desire for us to bore the tuner.
Starting at: $20.00
*Harrell tuner weights
*Approximately 11oz, Steel ~ 1.75" Long
*Approximately 6oz, Steel ~1" Long
*Approx. 4 oz Steel ~ .5" Long
*2 oz Aluminum ~ 1" Long
*Buying 3 weights enables you to put 3oz, 5oz, 7oz, 10oz, or 12oz to tuner
*All Weights and Lengths are Approximates
*All 4 weights are threaded so they can fit the tuner and all are also threaded to accept another weight
Starting at: $135.00
*Improves Tuning *Improves Accuracy *Attaches to any standard Harrell Tuner that is threaded *Includes the magic blue rubber washer to dampen vibrations *Short Slide is 6 1/4" Long and weighs approx. 8oz. *Long Slide is 9 1/4" Long and weighs approx. 9oz. *"Link" extends the length of the slide and provides more vibration dampening
Riverside Machine 11.5oz Stainless Weight kit Consists of the following 1-- 4oz Weight threaded on both ends 3-- 2oz weights threaded on both ends 1-- 1oz o weight "cap" threaded on one end 1-- .5oz washer to fit between weights This kit enable you to go from 1 to 11.5oz in .5oz increments. All Weights are Stainless Steel. Screws directly into the Harrell Tuner.