• Ruger 10-22 Picatinny Rail Scope Mount
• Machined From: Solid 7075 T6 Aircraft Grade Aluminum
• Finish: Matte Black
• Mounting Hardware: Socket Head Torx® Screws & Wrench provided
• Center Spread: 3.805"
• Overall Length of Mount: 7.064"

*Solid 7075 T6 Aircraft Grade Aluminum

*Matte Black

*#6-48 x 1/4 Screws

*Solid 7075 T6 Aircraft Grade Aluminum

*Matte Black

*#6-32 x 3/4 Screws

Model 257 is for 1" scope tubes. Designed for the shooter who needs stability and prefers independent rings. Available in Matte Black and Silver.

Model 261 is a truly unique mount. This one piece bolt action scope mount is designed for the serious rimfire shooter who wants a solid mounting set-up on their bolt action required. The port clearance allows loading and cartridge ejection on both left and right hand models. Available in Matte Black and Silver.

• Overall Length: 1"
• Clamp Length: 1"
• Ring width: 1"
• Bottom of Mount to bottom of Scope Tube: 0.774"
• Weight: 4.4 oz. *
• Black
• 1" Scope Rings 
• Works with any 3/8" or 11mm dovetail

The BKL Adjustable Mount System is a significant improvement over traditional adjustable scope mounts available on the market today; this design incorporates side rails for mounting additional shooting accessories, a lower profile than usually achievable in an adjustable mount, 2.5 inches of clamping length with six clamping screws and availability for 1inch or 30mm scope tubes. Available in Matte Black only.

BKL-260H 4" Long Unitized Dovetail Mount High

Model 274 comes with Model 257 and is designed to increase eye relief adjustment on receivers that have very little dovetail or where bolt is too far forward. Available in Matte Black and Silver.

• Model 278 * Off Set: 1.25"
• Overall Length: 2.25"
• Base Clamp Length: 1"
• Scope Clamp Length: 1"
• Bottom of Mount to bottom of Scope Tube: 0.774"
• Ring Width: 1"
• Weight: 5.5 oz.
• Model 263
• Overall Length: 1" 
• Clamp Length: 1"
• Ring width: 1"
• Works with any 3/8" or 11mm dovetail
• Matte Black

The BKL Adjustable Mount System is a significant improvement over traditional adjustable scope mounts available on the market today; this design incorporates side rails for mounting additional shooting accessories, a lower profile than usually achievable in an adjustable mount, 2.5 inches of clamping length with six clamping screws and availability for 1inch or 30mm scope tubes. Available in Matte Black only.

Designed for the shooter who needs stability and prefers independent rings. Available in Matte Black and Silver.