325-754-KSS1(5771)

Actions

Custom .22lr Rifle Actions All Actions must ship to a FFL Dealer and we can not Export without the proper permits.

Must ship to FFLMust have Export Permit for this item

9 Item(s)

per page

Grid  List 

Set Descending Direction
  1. Bolt Tool

    10X Bolt Tool

    $60.00

    Out of stock

    10X Bolt Tool

    This will enable you to break down any Team 10X X series bolt.

    Learn More
  2. 10X X3L - 3 Lug Action

    10X X3L - 3 Lug Action

    Starting at: $1,025.00

    Out of stock

    • THESE INCLUDE THE 3/8" DOVETAIL SCOPE BASES

    • Specifications:

    • *X-III Single Shot

    • Barrel Thread: 3/4"x16 tpi

    • Barrel Tenon: 1.0"

    • Firing Pin ' 6 o'clock

    • Bolt Throw: 46 degrees

    • Lock Time: 2.1 ms

    • Bolt: Right

    • Port: Left

    • Trigger Type: Any Remington 40x Style

    • Extractor: Two (2) Power Claws

    • Finish: Brushed Stainless

    • Trigger Hanger

    10x Custom X3L Rimfire actions and bolt assemblies give you the reliability, smoothness and innovative features specifically for precision shooters. Our action bodies are machined not forged, to exceptionally tight tolerances from a solid billet of 416R Stainless Steel.

    The bolts are also machined of 416R Stainless Steel with precise dimensions so the three (3) locking lugs align square in the action body. The X3L has an incorporated anti-bind rail for smooth operation when sliding bolt across loading ramp allowing ease of loading without jamming or sticking.

    The X3L comes with a trigger hanger that allows the shooter to install any Remington 40X style trigger.

    All X3L components are heat treated for hardness before final machining to prevent unwanted stress or warping.

    Learn More
  3. 2500X Parts

    2500X Parts

    Starting at: $9.95

    2500X Parts & Accessories

    Trigger Hanger

    • *works on 2500X, 2500XS, and will work on 2500XR if your trigger does not have a top safety
    • *hanger is reversible allowing a firing pin drop of .185" or .215" on a Jewell, Flavio, or Bix n Andy Trigger
    • *position small hole on side to the front for .185" drop, position in the rear for a .215" drop
    • *hanger comes with 2 pins for attaching trigger and 2 screws for attaching to action

    Bolt Stop Kit

    • *comes with Bolt Stop, pin, and spring
    • *works on 2500X, 2500XS, and 2500XR

    Firing Pin Spring

    • *Works on 2500X, 2500XS, and 2500XR
    • *This is the factory replacement spring

    Bolt Disassembly Tool

    • *comes with "Kleindhorst Tool" and tool for compressing spring
    • *works with 2500X, 2500XS, and 2500XR bolts

    Extractors

    • *1 puller and 1 pusher (extractor set)
    • *works on 2500X and 2500XS - will NOT work on 2500XR

    Extractor C-Clip (Spring)

    • *Snaps over bolt to hold extractors in position
    • *works on  2500X, 2500XS, and  will NOT work on 2500XR

    Cocking Piece

    • *Bolt cocking piece
    • *works on 2500X, 2500XS, and will NOT work on 2500XR
    Learn More
  4. 2500X

    2500X/Trident by Holeshot Arms, Single Shot .22lr Action

    Starting at: $1,395.00

    2500X and Trident Actions by Holeshot Arms

    • 2500X is a 2-Lug Action - Trident is a 3-Lug Action
    • Super tight tolerances on all fitted parts for perfect fit and slick operation.

    • Easy to load ramp design similar to the Anschutz.

    • Dual rear locking lugs symmetric about the horizontal center-line.

    • Entrance cams cut into the body so that the lugs can have equal areas on each lug.

    • Beveled loading port for easy access to chamber for loading.

    • 4 @ #8 screws for mounting scopes, 2 @ # 6 screws in between that are also reamed for .125 pins. That way a long one piece mount or the just front only will both be accommodated.

    • Firing pin design that easily unscrews using a Kleindorst type of tool available from SPF and a 1/16th allen wrench. 6 o'clock firing pin.

    • Cocking piece that is controlled by a bolt shroud such that it is always centered in the trigger and cannot rub. The shroud is pinned and a slot in the body controls the angularity.

    • Trigger hanger that can be reversed for a 0.030 change in pin fall.

    • Threaded bolt handle so that any available knob will work. We offer at least 3 types.

    • Wire EDM cut extractors from tool steel and the spring is beryllium copper. We don't rely on stamped, mass produced parts.

    Multi step process below used to machine body for exact repeatability with no stone left unturned:

    • 1. Undersized hole is gun-drilled in the finest stress relieved barrel quality 416R stainless steel.

    • 2. Body is rough machined and heat treat/stress relieved with oversize OD.

    • 3. Hole ID is finished after heat treat for perfect sizing and straightness on wire EDM.

    • 4. OD is then ground to size +0.003 based on EDM'ed hole ID.

    • 5. Face of the action and threads are then put in for best possible alignment.

    • 6. Lugs are factory lapped with special devices to load lugs same as when being fired.

    • 7. Body is engraved and hand finished.

    • 8. The whole body is Melonited.

    • 9. OD is then ground to size based on ID for a perfectly straight and round outside that has a shiny ground finish.

    If you want the best design and finest manufacturing processes on state of the art machinery from a proven manufacturer for your next build, the 2500X or Trident is for you.

    MUST SHIP TO A FFL HOLDER (FEDERAL FIREARMS LINCENSE)

    Learn More
  5. 2500XR Rimfire Repeater Action -RBRP

    2500XR Rimfire Repeater Action -RBRP

    $1,450.00

    Out of stock

    2500XR Rimfire Repeater Action -RBRP

    • *Remington 700 Short-Action Foot Print

    • *Drops into a BDL Stock w/out the Floor Plate

    • *Designed to be a Tactical Trainer in your Centerfire Stock

    • *Comes with a 25 MOA Picatinny Rail

    • *Dual Tenon- .750"x16 TPI or 1.0625" X 16 TPI

    • *Large Barrel Tenon Drawing is HERE

    • *Small Barrel Tenon Drawing is HERE

    • *Action OD is 1.350"

    • *Remington 700 Style Trigger with Trigger Hanger

    • *Action is fully Melonited

    • *Savage 10-Round Magazine- 1 Included

    • Must Ship to FFL
    Learn More
  6. 2500XS

    2500XS Sporter by SPF, .22lr Action

    Starting at: $1,350.00

    • *Same as 2500X Single Shot except it has
    •       Integrated 3/8" dovetail for Scope Mounting
    •      Slabbed Sides to reduce Weight
    •      Sako 5-Shot Magazine
    • *Super tight tolerances on all fitted parts for perfect fit and slick operation.

    • *Dual rear locking lugs symmetric about the horizontal center-line.

    • *Entrance cams cut into the body so that the lugs can have equal areas on each lug.

    • *Beveled loading port for easy access to chamber for loading.

    • *4 @ #8 screws for mounting scopes also reamed for .125 pins. That way a long one piece mount or the just front only will both be accommodated.

    • *Firing pin design that easily unscrews using a Kleindorst type of tool available from SPF and a 1/16th allen wrench. 6 o'clock firing pin.

    • *Cocking piece that is controlled by a bolt shroud such that it is always centered in the trigger and cannot rub. The shroud is pinned and a slot in the body controls the angularity.

    • *Trigger hanger that can be reversed for a 0.030 change in pin fall.

    • *Threaded bolt handle so that any available knob will work. We offer at least 3 types.

    • *Wire EDM cut extractors from tool steel and the spring is beryllium copper. We don't rely on stamped, mass produced parts.

    Multi step process below used to machine body for exact repeatability with no stone left unturned:

    • 1. Undersized hole is gun-drilled in the finest stress relieved barrel quality 416R stainless steel.

    • 2. Body is rough machined and heat treat/stress relieved with oversize OD.

    • 3. Hole ID is finished after heat treat for perfect sizing and straightness on wire EDM.

    • 4. OD is then ground to size +0.003 based on EDM'ed hole ID.

    • 5. Face of the action and threads are then put in for best possible alignment.

    • 6. Lugs are factory lapped with special devices to load lugs same as when being fired.

    • 7. Body is engraved and hand finished.

    • 8. The whole body is Melonited.

    • 9. OD is then ground to size based on ID for a perfectly straight and round outside that has a shiny ground finish.

    If you want the best design and finest manufacturing processes on state of the art machinery from a proven manufacturer for your next build, the 2500XS is for you.

    Learn More
  7. SPF-Lonestar Action

    Holeshot Arms Lonestar .22lr Action

    Starting at: $1,050.00

    *Built by Holeshot Arms
    *The perfected 40X
    *Right Bolt w/ Left or Right Port
    *Stainless Action
    *Melonite Finish on Bolt Handle
    *Barrel Tenon of 1.062 16TPI
    *Beadblast Finish
    *3 Action Screws
    *.22lr
    *Same footprint as 40X
    *Built In Bolt Stop
    *Remington Style Trigger

    Learn More
  8. REM 700 RECEIVER S/A BLUED .308 BOLT FACE W/XMARK PRO-Blueprinted

    REM 700 RECEIVER S/A BLUED .308 BOLT FACE W/XMARK PRO-Blueprinted

    $499.95

    Blueprinted REM 700 RECEIVER S/A BLUED .308 BOLT FACE W/XMARK PRO

    • *Model 700 Reciever
    • *.308 Bolt Face for all S/A Calibers Except .223
    • *Externally Adjustable X MARK PRO Trigger Included
    • *Action, Bolt, Trigger only, no bottom metal or recoil lug
    • *Blueprinted Action consisting of Trued Action Face, Trued Lug Face, Trued Threads, Lapped Bolt Lugs
    • *Thread Diameter 1.075"/1.072"

    Must Ship to FFLExport only with Permit

    Learn More
  9. Turbo Action Parts

    Turbo Action Parts

    Starting at: $6.00

    Turbo Action Parts Learn More

9 Item(s)

per page

Grid  List 

Set Descending Direction