325-754-KSS1(5771)

Scope Mounting

Accessories for mounting scope to firearm such as rings and bases

Items 1 to 10 of 28 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction
  1. 2500X/Trident Pic Rails

    2500X/Trident Pic Rails

    Starting at: $75.00

    Holeshot Arms Pic Rails for 2500X/Trident

    • *#84 - RBRP 10 MOA Pic Rail

    • *#85 - RBLP 10 MOA Pic Rail

    • *#86 - RBRP 10 MOA -Front Mount Rear Pin

    • *#87 - RBLP 10 MOA - Front Mount Rear Pin

    #84 & #85 are your Traditional Picatinny Rails with 10MOA built In

    #86 & #87 mount with screws on the front and just have a pin for the rear mount

    These are designed this way to prevent binding across the port when closing the bolt

    Learn More
  2.    BKL-254 4" Long Cantilever with 1-5/8" Clamping Length

    BKL-254 4" Long Cantilever with 1-5/8" Clamping Length

    Starting at: $38.00

    Model 254 is a longer version of Model 253 allowing additional overhang and scope adjustment between rings. Available in Matte Black and Silver. Also available in 30mm, item# BKL-354.

    • *Overall Length: 4”

    • *Clamp Length: 1.65”

    • *Ring Width: 0.6”

    • *Bottom of Mount to bottom of Scope Tube: 0.774”

    • *Turret Clearance: 0.125”

    • *Weight: 5.1 oz.

    No Export

    Learn More
  3. Weaver 4 Hole Skeleton Mount Rings

    Weaver 4 Hole Skeleton Mount Rings

    Starting at: $26.65

    Weaver's popular 4-Hole Rings are now available in heights for just about any shooter and shooting situation. Choose from among 1" or 30mm and medium, high, extra-high and XX-high. Dressed in matte black and featuring no strip/slip Torx® screws, these new rings incorporate Weaver's famous Cross-Lock design and lightweight aircraft grade aluminum.  These fit any Weaver Style bases.

    • Medium fits up to 40mm Objective Lens
    • High fits up to 44mm Objective Lens
    • X-High fits up to 50mm Objective Lens
    • XX-High  fits up to 56mm Objective Lens
    Learn More
  4. BKL 274MB

    BKL-274 0.6" Long Offset 1" Dovetail Rings

    Starting at: $35.95

    Model 274 comes with Model 257 and is designed to increase eye relief adjustment on receivers that have very little dovetail or where bolt is too far forward. Available in Matte Black and Silver.

    • * Off Set: 1.35"

    • * Base and Ring Clamp Width: 0.60"

    • * Bottom of Mount to bottom of Scope Tube: 0.774"

    • * Weight: 5.5 oz.

    • * Model 257 OAL: 0.60"

    • * Model 274 OAL: 2"

    • * Works with any 3/8" or 11mm Dovetail

    • * Rings for 1" Scope Tube

    No Export

    Learn More
  5. Burris 1"

    Burris Signature Zee Rings Matte Black

    Starting at: $9.99

    SIGNATURE™ RINGS

    The best rifle scope is only as good as the rings that hold it in place. Which is why legendary Burris Signature Rings are the choice of the world’s most discriminating shooters. The tremendous gripping power of the ingenious design anchors the scope at zero round after round. Additionally, a synthetic self-aligning insert inside the steel ring cradles the scope and insures proper alignment and guarantees scope-to-ring contact is virtually 100%. That’s as much as 30% more contact than some other mounts. Scopes perform at their optical peak when all internal lenses are properly centered. For that reason, Signature Rings accept Pos-Align Offset Inserts.

     

    We can Export

    Learn More
  6. BKL-388MB 30mm Unitized Dovetail Adjustable Scope Mount Black

    BKL-388MB 30mm Unitized Dovetail Adjustable Scope Mount Black

    $66.95

    *Overall Length: 4.0" *Clamping Length: 2.5" *Ring Width: 0.6" *Turret Clearance: 0.180" *Weight: 4.5oz *Bottom of Mount to Bottom of Scope Tube: 0.825" BKL Technologies, the Rimfire and Airgun Mount Specialist. is expanding the world's largest selection of airgun and rimfire dovetail mounting solutions to include an Adjustable Scope Mount System. Featuring BKL's patented Auto-Centering and Clamp Spreading technology, this mount is ideal for rifles that need additional scope elevation adjustment and for those trying to keep their crosshairs optically centered in the scope tube. The BKL adjustable mount system is a significant improvement over traditional adjustable scope mounts available on the market today; this design incorporates side rails for mounting additional shooting accessories, a lower profile than usually achievable in an adjustable mount, 2.5 inches of clamping length with six clamping screws, and availability for 1-inch or 30mm scope tubes. Learn More
  7. Mount Only, scope and action not Included

    Universal BR Extended Front Scope Mount

    Starting at: $45.00

    Out of stock

    Universal BR Extended Front Scope Mount

    Any action that has a loading port creates a week spot in the action.  When you close the bolt, that causes the action to flex opposite of the loading port.  If you then have a scope mounted in the traditional manner with one ring in front of the port and one ring behind the port, you have the possibility of stressing the scope when you close the bolt.  The use of this mount would prevent that by having both scope rings on one side of the loading port.

     

    This Scope Mount will fit the following

    • *Any 1.35" Diameter action with screw hole spacing of .86" or .76"

    • *3.25" OAL

    • *This with #6 screws will fit the following

    •    *X-III by 10X Custom Rifles

    •    *X3L by 10X Custom Rifles

    •    *Remington 40X

    •    *Copperhead by SPF

    •    *Myers by SPF

    •    *Turbo by DiOrio Manufacturing

    •    *Older Turbo by Flash Ebert

    •    *Swindlehurst by Kelbly

    • *Order with #8 Screws for the 2500X

    • MOUNT ONLY, scope and action not Included

    • Free USPS Shipping
    Learn More
  8. BURRIS POS-ALIGN RING INSERTS 1"

    BURRIS SIGNATURE POSI-ALIGN RING INSERT +/- .020" 1-INSERT

    $9.99

    BURRIS SIGNATURE POSI-ALIGN RING INSERT +/- .020" 1-INSERT Learn More
  9. BKL 257MB

    BKL 257 1" Dovetail Rings

    Starting at: $19.50

    • Model 257 is for 1" scope tubes. Designed for the shooter who needs stability and prefers independent rings. Available in Matte Black and Silver.

    • * Overall length: 0.60"

    • * Clamp length: 0.60"

    • * Ring width: 0.60"

    • * Bottom of mount to bottom of scope tube: 0.774"

    • * Weight: 3.1 oz.

    No Export

    Learn More
  10. BKL 354MB

    BKL-354 4" Long Cantilever with 1-5/8" Clamping Length 30mm Dovetail Mount

    Starting at: $57.00

    Model 354 is a 30mm dovetail mount that allows for additional overhang and scope adjustment between rings. Available in Matte Black and Silver.

    • * Overall length: 4"

    • * Clamp length: 1.65"

    • * Ring width: 0.60"

    • * Scope turret clearance: 0.125"

    • * Weight: 4.2 oz.

    • * Works with any 3/8" or 11mm Dovetail

    • * Rings for 30mm Scope Tube

    • * Available in Black or Silver

    No Export

    Learn More

Items 1 to 10 of 28 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction